Form Of And Function Of Military Antennas

By Patty Goff


A radio antenna (or just aerial) is a transducer that can send and receive radio waves (electromagnetic waves) designed for radio, TV, cell phones, radar or satellite. A radio antenna is a transducer with a usable efficiency can perform one or both of these energy conversions: marketable alternating electrical energy for transmission of radio wave energy. Marketable radio wave energy to alternating electrical energy (military antennas).

This parameter is defined as the ratio between the maximum radiated power in a geometric direction and power radiated in opposite direction. When this relationship is reflected in dB scale, the ratio F / B (Front / Back) is the difference in dB between the maximum radiation level and radiation level of 180 degrees. This parameter is especially useful when interference back is critical in choosing the antenna that we use.

This relationship also can be seen from another point of view, indicating how good the antenna in the rejection of signals from the rear. Rarely is really important, because the interference from the rear do not usually happen, but it can happen. The F / B ratio is not a very useful number because often varies greatly from one channel to another. Of course, if it is the radiation pattern, then the F / B is not needed.

Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.

If the antenna is replaced by the radiation resistance, this would do their job, ie, would produce the same amount of power that the antenna would radiate. The radiation resistance is equal to the ratio of the power radiated by the aerial divided by the square of the current in its feed point. One could obtain an mast efficiency, given that is the ratio of the radiated power and the dissipated power.

You can also define the beam width between zero, which is the angular range of the main beam of a radiation pattern between two adjacent zeros to maximum. Create antennas radiated electromagnetic fields. Polarized electromagnetic defined in a certain direction, as the geometric shape that traces the edge of electric field vector at a certain distance from the antenna, to change the time.

The polarization can be linear, circular and elliptical. Linear polarization can take different orientations (horizontal, vertical, +45, -45). The circular or elliptical polarizations can be right or left (right-handed or left-handed), according to the direction of rotation of the field (observed away from the antenna). Transmitters within decoupling coefficient defined polarization. This measures the amount of power that is capable of receiving a polarized antenna of a form having an effective.

The wire transmitters are analyzed from the electrical currents of the conductors. Aperture aerials are those that use surfaces or openings to direct the electromagnetic beam which concentrate their transmission and reception antenna system in one direction.




About the Author:



No comments:

Post a Comment